Tuesday, 17 November 2026

Turn off Liquid Glass iOS 27: one slider, one switch, one catch

iOS 27 has no single off switch for Liquid Glass, but a slider and one accessibility toggle get you close. Apple is also testing a softer scroll effect.

Person adjusting settings on a smartphone at a cafe table

The short version

  • iOS 27 has no true off switch for Liquid Glass, but two settings remove most of the see-through effect.
  • A new slider under Settings, Appearance, Liquid Glass runs from ultraclear to fully tinted, replacing the old Clear and Tinted presets.
  • Reduce Transparency in Accessibility makes many glassy backgrounds solid, and the same steps work on iPad and Mac.
  • Apple is testing a softer scroll fade under navigation bars in the iOS 27.3 beta, but testers can't switch it on.
Quick read · 2 min

There's no true off switch for Liquid Glass in iOS 27, but two settings get you most of the way. First, open Settings, tap Appearance, then Liquid Glass, and drag the slider to the far right. That's the fully tinted end, and it makes buttons, menus and the search bar opaque instead of see-through.

Still too glassy? Go to Settings, Accessibility, Display & Text Size and switch on Reduce Transparency. Increase Contrast, just below it, sharpens edges if text looks soft. Neither setting brings back the flat iOS 18 look, though.

  • The slider replaced iOS 26's Clear and Tinted presets.
  • The same settings exist on iPadOS 27 and macOS Golden Gate 27.
  • Every change takes seconds to undo.

Apple is also testing a softer blur under navigation bars in the iOS 27.3 beta, for people who keep the tint at 25 percent or lower. It's hidden from testers for now, and Apple hasn't said if it will ship.

You can’t fully turn off Liquid Glass in iOS 27, but you can get very close in under a minute. Apple gives you two controls: a new Liquid Glass slider in Settings that makes the glass more solid, and the older Reduce Transparency switch in Accessibility that flattens many of the see-through backgrounds that are left.

That matters if menus, buttons and pop-ups on your iPhone have felt hard to read since the iOS 26 redesign. Below are the exact taps, what each setting really changes, the one thing neither can do, and a small tweak Apple is quietly testing in the iOS 27.3 beta for people who like the glass but hate how it meets the content under it.

01

How to turn off Liquid Glass in iOS 27, step by step

The fastest way to tone down Liquid Glass in iOS 27 is the new slider, which sits in its own Appearance section of Settings. Here is the full route, starting with the gentlest change:

  1. Open the Settings app and tap Appearance. On iOS 27 it sits in the second group of rows, just under Action Button.
  2. Tap Liquid Glass. If you’ve never changed it, the row will say Default.
  3. You’ll see a live preview card with a slider under it. The icon on the left end looks like clear glass, and the one on the right is filled in.
  4. Drag the slider all the way to the right. This is the fully tinted setting, and the buttons and search bar in the preview turn opaque instead of see-through.

If that’s still too glassy for you, go one step further:

  1. Go back to the main Settings screen and tap Accessibility.
  2. Under Vision, tap Display & Text Size.
  3. Turn on Reduce Transparency.

You’ll see the result right on that screen. The back button goes solid white and a thin line appears under the page title, which is the glass flattening out across the whole phone.

Frosted glass pane next to a smartphone on a desk
02

Liquid Glass slider vs Reduce Transparency: which one do you need?

For most people the slider alone is enough, and Reduce Transparency is the backup for anyone who wants as little glass as possible. They do overlapping jobs, but guides disagree a little on how much they overlap.

  • The slider sets how see-through floating parts of the screen are, from ultraclear on the left to fully tinted on the right. The middle is Apple’s default. Pushing it right makes menus, buttons and other controls more solid everywhere, Control Center and the Home Screen included.
  • Reduce Transparency has lived in Accessibility for years. Apple describes it as improving contrast by cutting back transparency and blur on some backgrounds.

Here’s the wrinkle. One hands-on guide found that turning on Reduce Transparency moves the Liquid Glass slider to its far right end, so changing one changes the other and you only need to touch one of them. Another guide treats the switch as an extra step that goes further than the slider. Our advice is simple: start with the slider, live with it for a day, and only flip Reduce Transparency if text still feels muddy. You lose nothing by trying both, since each one is a single tap or drag to undo.

There’s also a third switch worth knowing about. Increase Contrast, which sits right below Reduce Transparency, sharpens the edges of buttons and text without changing how transparent anything is. Apple says it improves the color contrast between what’s in front and the background behind it. If your problem is fuzzy edges rather than see-through panels, try this one on its own first.

03

The catch: your iPhone won’t look like iOS 18 again

Even with the slider at fully tinted and Reduce Transparency on, Liquid Glass doesn’t disappear. Backgrounds in pop-up windows get far less clear, but they don’t become completely solid, and your iPhone won’t go back to the flat look of iOS 18.

That’s why Apple talks about the slider as a control, not an off switch. The design itself, with floating controls and rounded glassy bars, stays. What you’re changing is how much of the content behind those controls shows through. For many people that’s the part that caused the trouble in the first place: less contrast between text in a pop-up and whatever sits behind it.

If you rely on the iPhone’s accessibility features, the Display & Text Size screen has more help that pairs well with a tinted setting:

  • Bold Text makes text across the system thicker.
  • Button Shapes adds shapes such as an underline beneath Back buttons, so they stand out from the glass.
  • Larger Text lets you pick a bigger reading size with a slider.
  • Reduce White Point tones down the intensity of bright colors.
Reader holding a phone at arm's length in a living room
04

Why Apple added a slider instead of an off switch

Apple introduced Liquid Glass with iOS 26, and it split iPhone owners almost straight away. Some saw it as one of Apple’s best design changes in years. Others found that the translucent menus made text harder to read, especially people without perfect eyesight or with accessibility needs.

Apple didn’t drop the design. It spent much of 2026 refining it instead. iOS 26 offered two presets, Clear and Tinted. With iOS 27, Apple swapped those for a continuous transparency slider, which gives you much finer control than a two-way choice, and it also put a more uniform background behind content at the top of apps to help readability.

The slider kept changing during testing. In iOS 27 beta 5, released in August, Apple made the clear end of the slider even more transparent than before. So the range now runs further in both directions: glassier than ever if you love the effect, and close to solid if you don’t.

05

What Apple is testing in the iOS 27.3 beta

Apple is testing a softer way for content to fade out under navigation bars, the strip at the top of an app with the title and back button. The finding comes from pdfu, a well-known code sleuth who digs through beta software, who shared side-by-side images from iOS 27.3 beta 2.

Right now in iOS 27, a navigation bar has a crisp lower edge where it meets the list or page you’re scrolling. With the test feature on, that hard line gives way to a gradual blur, so text and images melt into the bar as they scroll under it. It brings back part of the look iOS 26 had.

A few details matter if you’re hoping to try it:

  • It only kicks in when the Liquid Glass tint is set to 25 percent or lower, so it’s aimed at people who keep the glass fairly clear.
  • It only affects navigation bars that use Apple’s default style, so some apps won’t change.
  • It’s hidden behind an internal feature flag. Developers and public beta testers can’t turn it on in Settings.

Apple hasn’t said whether the softer fade will ship, become an option in Settings or stay an internal experiment. That fits the pattern so far: Apple keeps nudging Liquid Glass in small steps rather than reversing it.

06

What this means for your iPhone, iPad and Mac

If Liquid Glass bothers you today, you don’t need to wait for iOS 27.3 or any future update. The slider and Reduce Transparency are already in iOS 27, and they work the same way on iPadOS 27.

The Mac works almost the same way too. On macOS Golden Gate 27, open System Settings and click Appearance to find the same Liquid Glass slider. Reduce Transparency is under System Settings, Accessibility, Display.

And if you’re on the other side of the debate, the slider works for you as well. Drag it to the far left for the clearest glass Apple has offered so far. If you switched it off months ago, it may be worth sliding it back toward the middle to see whether the iOS 27 refinements change your mind, since it takes seconds to undo.

07

Quick answers

Can you completely turn off Liquid Glass in iOS 27?

No. There’s no single off switch. Moving the Liquid Glass slider to fully tinted and turning on Reduce Transparency removes most of the see-through effect, but the design itself stays.

Where is the Liquid Glass setting in iOS 27?

Open Settings, tap Appearance, then tap Liquid Glass. Reduce Transparency is in Settings, Accessibility, Display & Text Size.

What happened to the Clear and Tinted options?

iOS 27 replaced the two presets from iOS 26 with one slider. The left end is the clearest glass and the right end is fully tinted, with Apple’s default in the middle.

You're reading the quick version.